WORNE Studio · Scottsdale, AZ

fit.

Finished garment measurements, laid flat, in inches, after dye and wash. Chest is armpit to armpit. Length is the high point of the shoulder to the hem. Tolerance is ±0.5 in. Production partners: these are the numbers we sign off samples against.

shrunken square tee.

Men's. Our main cut. Slim through the chest with straight sides, the hem lands at the belt, short close sleeves, set-in shoulder on the shoulder line.

Shrunken square tee on a model
SizeChestLengthSleeve
S18.7524.57
M2025.57.5
L21.526.58
XL2327.58.5

Fabric: 4.5 to 5.5 oz (150 to 185 GSM) combed cotton, garment dyed. Sleeve is shoulder seam to hem. Drop 01 runs M, L and XL. Made from a stock blank, then dyed and cropped and re-hemmed to these lengths.

long sleeve.

Unisex and lightweight. Relaxed through the body, with sleeves long enough to bunch at the wrist. Most women take an M.

Long sleeve on two models
SizeChestLengthSleeve
S192532
M20.252633
L21.752734
XL23.252835

Fabric: 4.3 to 5.3 oz (145 to 180 GSM). Sleeve is center back to cuff. Runs S to XL.

baby tee.

Women's. Fitted, cropped to the high hip, short cap sleeve. Runs S and M.

Baby tee on a model
SizeChestLengthSleeve
S15.519.54.5
M16.5204.75

Targets to confirm from blank samples. Fine cotton jersey or micro-rib with some stretch, garment dyed.

oversized hoodie.

Unisex. Oversized with a dropped shoulder. Heavyweight fleece, about 400 GSM or more. Runs M to XL; size down for a closer fit.

Hoodie on two models
SizeChestLength
M2527.5
L26.528.5
XL2829.5

Targets to confirm from blank samples. Heavy fleece shrinks less, so pick the blank closest to these after one wash.

how we hit these numbers.

No custom pattern for drop 01. Stock blanks, then finishing.

1. Stock blankPick the blank whose chest lands on the target after the wash. Samples first, in two sizes.
2. Garment dye + washExpect up to 5 to 8% shrink in length and 2 to 5% in width on blanks that aren't preshrunk.
3. Crop and re-hemA sewing contractor cuts the body to the length in the table and re-hems it. Roughly $1.50 to $3 per piece.

How we chose this cut: compare the cuts.